Teejet Matrix Pro 840GS User Manual Page 30
- Page / 82
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
24
www.teejet.com
HOMEOVERVIEW SETUP IMPLEMENT FULL SCREEN GPSINTRODUCTION GUIDANCE DROPLET MONITOR
Transfer
The machine settings transfer screen allows the transfer of
selected machine settings to or from a USB drive as well as
deleting machine settings.
Machine settings transferred to a USB storage device can be
opened and updated using Fieldware Link. From Fieldware Link,
machine settings can be ported back to a USB storage device to
be moved back onto the console internal storage for use.
NOTE: Not all settings saved as part of the machine settings are
available to be edited in Fieldware Link. See the setting
availability chart for details.
Machine settings transferred to a storage device are
removed from the console and are no longer available for
use.
1. Press DATA MANAGEMENT side tab .
2. Press Machine settings .
3. Press Transfer .
4. Select from:
►Move machine settings to USB storage – used to move
machine settings from internal storage to USB storage
►Move machine settings to internal storage – used to move
machine settings from USB storage to internal storage
►Delete machine settings – used to delete machine settings
from internal storage or USB storage
5. Press RETURN arrow or DATA MANAGEMENT side
tab to return to the main Data Management screen.
Figure 5-32: Machine settings - Transfer
Manage
The machine settings manage screen allows the creation of a
new empty machine settings, the copying of a selected machine
settings to a new machine settings, the deletion of a selected
machine settings, the saving of the current machine settings to the
selected machine settings or the loading of the selected machine
settings to the current settings.
1. Press DATA MANAGEMENT side tab .
2. Press Machine settings .
3. Press Manage .
4. Select from:
►Create new machine settings – used to create new machine
settings with no associated implement information
►Copy machine settings – used to copy the selected
machine settings into new machine settings
►Delete machine settings from internal storage – used to
delete the selected machine settings from internal storage
►Save machine settings – used to save the current machine
settings to the selected machine settings
►Load machine settings – used to load the selected machine
settings to the current settings
5. Press RETURN arrow or DATA MANAGEMENT side
tab to return to the main Data Management screen.
Figure 5-33: Machine settings - Manage
- MATRIX PRO GS 1
- Table of contents 3
- CHAPTER 6 GUIDANCE 30 4
- CHAPTER 7 GPS 52 5
- Safety information 6
- CHAPTER 1 SYSTEM OVERVIEW 7
- Matrix Pro 840GS console 8
- RealView® camera 8
- Additional information 8
- CONFIGURATIONS 9
- > 0.0 < 10
- Console screen colours 11
- Simple or Advanced mode 11
- Antenna to boom (m) 12
- Simple mode 14
- Advanced mode 14
- 98-05273-EN R4 15
- CHAPTER 5 SYSTEM SETUP 17
- CONFIGURATION 18
- Implement 19
- Implement 20
- Lightbar 21
- AutoSteer 21
- Tilt correction 22
- PRN not shown 23
- Video setup unavailable 23
- Sensors unavailable 24
- Pressure Sensor 24
- Droplet size monitor 25
- DATA MANAGEMENT 26
- Job data 26
- Transfer 27
- Reports 28
- Options 28
- Machine settings 29
- Machine settings availability 31
- CONSOLE 32
- Cultural 33
- Audio volume 33
- Demo mode 34
- CHAPTER 6 GUIDANCE 36
- Navigation screens options 37
- GUIDANCE BAR 38
- STATUS BAR 39
- Status/information screens 39
- GUIDELINES 46
- Curved lookahead guideline 46
- Marking A and B points 46
- Enter name 47
- Guideline name: Stream Edge 48
- Total number of guidelines: 4 48
- Turn now 49
- APPLICATION BOUNDARY 50
- Area bounded = 64.45 ha 51
- Save Delete 51
- RETURN TO POINT 52
- BOOMPILOT 53
- Single section 53
- CHAPTER 7 GPS 58
- GPS type 59
- GPS port 59
- GPS status information 59
- GGA requirements 60
- Programming receiver 60
- Alternate PRN 61
- CHAPTER 8 IMPLEMENT SETUP 62
- SINGLE SECTION SETUP 64
- – used to enter the offset 65
- OEM spreader implement type 66
- Straight implement type 68
- Staggered implement type 70
- – used to enter the 70
- FACTORY SETTINGS & RANGES 74
- Backwards 75
- 0.0 m -75.0 to 75.0 m 75
- Low pressure alarm (bar) 76
- + 78
- AIXR TeeJet® AIXR11004 79
- Very coarse 79
- 0 1 2 3 4 5 6 7 bar 79
- Unit specications 81
- Copyrights 81
- Trademarks 81
- Limitation of liability 81
Related products and manuals for Computers Teejet Matrix Pro 840GS
(82 pages)
(82 pages)
(82 pages)
(82 pages)
Computers Teejet CenterLine 2.0 User Manual
(66 pages)
(66 pages)
Computers Teejet Swath XL User Manual
(162 pages)
(162 pages)
© 2020, manymanuals.com. All rights reserved. | 0.362 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals