Teejet Matrix Pro 840GS User Manual Page 18
- Page / 82
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
12
www.teejet.com
HOMEOVERVIEW SETUP IMPLEMENT FULL SCREEN GPSINTRODUCTION GUIDANCE DROPLET MONITOR
Unavailable options when job is active
When a job is active some setup options are unavailable. See the Unit setup mode menu structure chart for indication of which options
are not accessible.
Figure 5-2: Examples of unavailable options
CONFIGURATION
Conguration is used to congure the Implement, Lightbar, AutoSteer, Tilt Correction, GPS, Video, Sensors and Droplet size monitor.
NOTE: Feature availability will vary depending on the devices available on the Matrix Pro GS system.
1. Press UNIT SETUP bottom tab .
2. Press CONFIGURATION side tab .
3. Select from:
►Implement – used to establish machine type, GPS antenna
height, implement type, symmetric implement layout,
implement offset distance/direction, number of implement
sections, guidance width, application/working width and
applied area alarm times.
● In Straight mode – boom offset direction, antenna to boom
distance, overlap percentage, implement delay on time
and implement delay off time
● In Spreader mode: TeeJet – antenna to disks distance,
overlap percentage, implement delay on time, implement
delay off time, spread offset distance, section offset
distances and section lengths
● In Spreader mode: OEM – antenna to disks distance, start
distance, stop distance, section start offsets and section
stop offsets
● In Staggered mode – Section 1 offset direction, antenna to
Section 1 distance, overlap percentage, implement delay
on time, implement delay off time and section offsets
►Lightbar – used to establish LED brightness, display mode
and LED spacing
►AutoSteer – used to enable/disable assisted/auto steering as
well as establish valve setup settings, steering settings and
steering angle sensor settings; and perform valve tests, or
valve diagnostics
►Tilt correction – used to enable/disable and calibrate the tilt
gyro module, allowing for tilt correction for application on
hilly or sloped terrain
►GPS – used to establish the GPS type, port and PRN as well
as to view GPS status information
►Video – used to set up individual cameras
►Sensor – used to establish pressure sensor settings
►Droplet size monitor – used to enable/disable and set up
preset and current nozzles
Figure 5-3: Configuration options
- MATRIX PRO GS 1
- Table of contents 3
- CHAPTER 6 GUIDANCE 30 4
- CHAPTER 7 GPS 52 5
- Safety information 6
- CHAPTER 1 SYSTEM OVERVIEW 7
- Matrix Pro 840GS console 8
- RealView® camera 8
- Additional information 8
- CONFIGURATIONS 9
- > 0.0 < 10
- Console screen colours 11
- Simple or Advanced mode 11
- Antenna to boom (m) 12
- Simple mode 14
- Advanced mode 14
- 98-05273-EN R4 15
- CHAPTER 5 SYSTEM SETUP 17
- CONFIGURATION 18
- Implement 19
- Implement 20
- Lightbar 21
- AutoSteer 21
- Tilt correction 22
- PRN not shown 23
- Video setup unavailable 23
- Sensors unavailable 24
- Pressure Sensor 24
- Droplet size monitor 25
- DATA MANAGEMENT 26
- Job data 26
- Transfer 27
- Reports 28
- Options 28
- Machine settings 29
- Machine settings availability 31
- CONSOLE 32
- Cultural 33
- Audio volume 33
- Demo mode 34
- CHAPTER 6 GUIDANCE 36
- Navigation screens options 37
- GUIDANCE BAR 38
- STATUS BAR 39
- Status/information screens 39
- GUIDELINES 46
- Curved lookahead guideline 46
- Marking A and B points 46
- Enter name 47
- Guideline name: Stream Edge 48
- Total number of guidelines: 4 48
- Turn now 49
- APPLICATION BOUNDARY 50
- Area bounded = 64.45 ha 51
- Save Delete 51
- RETURN TO POINT 52
- BOOMPILOT 53
- Single section 53
- CHAPTER 7 GPS 58
- GPS type 59
- GPS port 59
- GPS status information 59
- GGA requirements 60
- Programming receiver 60
- Alternate PRN 61
- CHAPTER 8 IMPLEMENT SETUP 62
- SINGLE SECTION SETUP 64
- – used to enter the offset 65
- OEM spreader implement type 66
- Straight implement type 68
- Staggered implement type 70
- – used to enter the 70
- FACTORY SETTINGS & RANGES 74
- Backwards 75
- 0.0 m -75.0 to 75.0 m 75
- Low pressure alarm (bar) 76
- + 78
- AIXR TeeJet® AIXR11004 79
- Very coarse 79
- 0 1 2 3 4 5 6 7 bar 79
- Unit specications 81
- Copyrights 81
- Trademarks 81
- Limitation of liability 81
Related products and manuals for Computers Teejet Matrix Pro 840GS
(82 pages)
(82 pages)
(82 pages)
(82 pages)
Computers Teejet CenterLine 2.0 User Manual
(66 pages)
(66 pages)
Computers Teejet Swath XL User Manual
(162 pages)
(162 pages)
© 2020, manymanuals.com. All rights reserved. | 0.486 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals