19
98-05273-EN R4
HOME OVERVIEWSETUP IMPLEMENT FULL SCREENGPS INTRODUCTIONGUIDANCEDROPLET MONITOR
Figure 5-20: Pressure sensor
Droplet size monitor
When a pressure sensor interface kit is present, droplet size
monitor is used to enable/disable the Droplet Size Monitor (DSM),
preset up to ve (5) nozzles and select the current nozzle.
For detailed setup instructions, refer to the droplet size monitor
chapter in this manual.
1. Press CONFIGURATION side tab .
2. Press Droplet size monitor .
3. Select if droplet size monitor is enabled or disabled.
4. When enabled, select from:
►Nozzle presets – selects up to ve (5) nozzles for quick
recall
►Current nozzle – selects the current nozzle for determining
droplet size information
5. Press RETURN arrow or CONFIGURATION side tab
to return to the main Conguration screen.
Figure 5-21: Droplet size monitor
Droplet size monitor unavailable
If a pressure sensor interface kit is not installed, setup options will
not be available.
Figure 5-22: Pressure sensor interface kit not detected
Comments to this Manuals