Teejet Sentry 6140 User Manual download pdf (Page 12)

www.teejet.com

Sentry 6140 Tip Flow Monitor

Display Brightness

Sets the brightness level of the display. Range is 5% to 100% in

5% increments.

1. Press the MINUS/PLUS buttons

to adjust the brightness.

2. Press

►NEXT PAGE button

to proceed to Master Sound.

►PREVIOUS PAGE button

to go back to Boom Section On/

Off Beep.

Figure 16: Display Brightness

Master Sound

Enable/disable console sound.

1. Press the UP/DOWN buttons

to toggle the sound on or off.

2. Press

►NEXT PAGE button

to proceed to Tip Alarm Percentage.

►PREVIOUS PAGE button

to go back to Display Brightness.

Figure 17: Master Sound

Tip Alarm Percentage

Sets the error reporting range for the tip sensors. If the ow

rate of an individual tip falls below, or rises above this range,

the console will generate an alarm. The value entered is the

percentage above and below the average ow that a tip must pass

to trigger an alarm. Range is 0% to 100%.

1. Press the MINUS/PLUS buttons

to adjust the percentage.

2. Press

►NEXT PAGE button

to proceed to Tip Alarm Delay.

►PREVIOUS PAGE button

to go back to Master Sound.

Figure 18: Tip Alarm Percentage

Tip Alarm Delay

Sets the time the console will wait after an error has been

encountered before sounding a tip alarm. If the error is corrected

within this time, no alarm will sound or error will display on screen. The

delay value is selectable from 1 to 10 seconds.

1. Press the MINUS/PLUS buttons

to adjust the time.

2. Press

►NEXT PAGE button

to proceed to Number of Sections.

►PREVIOUS PAGE button

to go back to Tip Alarm

Percentage.

Figure 19: Tip Alarm Delay

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Teejet Sentry 6140 User Manual Page 12

Comments to this Manuals

Related products and manuals for Computers Teejet Sentry 6140