15
98-05226-ENUS R4
UniPilot
®
Replacement of Contact Wheel
Figure 1-20: Unscrew Cover
Figure 1-21: Remove Top Cover
Figure 1-22: Contact Wheel With Holding Pins
The contact wheel is a wear part and has to be replaced when worn.
To replace the contact wheel:
1. Put the UniPilot ESM in the standby position.
2. Unscrew the cover mounting screw with a 3 mm allen wrench.
3. Remove the cover from the contact wheel.
4. Pull the wheel from the 4 holding pins.
5. Slip the new contact wheel onto the four holding bolts and press it down.
6. Replace the cover and hand tighten the holding screw.
Comments to this Manuals