Teejet UniPilot User Manual download pdf (Page 11)

98-05226-ENUS R4

UniPilot

UniPilot ESM

Assemble UniPilot ESM

Figure 1-4: Insert UniPilot ESM Into Sliding Carriage

Sliding

Carriage

Assembly

Base

Figure 1-5: Slip UniPilot ESM Onto Mounting Bracket

Sliding

Carriage

Steering

Column

Bracket

Figure 1-6: Tighten Sliding Carriage

T-Bolt

Figure 1-7: Secure the Mounting Bracket

1. Slip the sliding carriage onto the assembly base.

2. Slip the steering column bracket between assembly base and sliding carriage.

3. With the UniPilot ESM in the standby position (see page 12), position the UniPilot ESM

a distance of 1.6 in. / 40 mm from the steering wheel.

4. Tighten the sliding carriage black T-bolt.

Figure 1-8: Positioning of UniPilot ESM

1.6"

40 mm

9.25"

235 mm

Figure 1-9: Positioning of UniPilot ESM

Disassemble UniPilot ESM

The disassembly of the steering motor UniPilot ESM happens in the reverse order of the

assembly.

Secure the Mounting Bracket

Firmly tighten u-bolts, metal strap or other attachment device to the steering column to

make sure that bracket(s) does not move when the steering wheel is rotated.

Make sure steering wheel freely rotates when the UniPilot ESM is in the operating position

(see page 12).

HINT: Mark the ideal position of the UniPilot ESM on the steering wheel bracket to make

the next vehicle change easier.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Teejet UniPilot User Manual Page 11