Teejet CenterLine 2.0 User Manual download pdf (Page 56)

50 CenterLine

CenterLine Real-Time Operation

CenterLine

Software Version 2.00

The lightbar now displays <MARK B>. The next step is to establish guideline point B. To do this,

press Enter as the vehicle passes over the desired B location. This establishes the reference

guideline. The lightbar starts displaying X-Track guidance information as well as any user selected

messages defined in Lightbar setup (See “Lightbar Setup” on page 25). If the vehicle is too far

from the previously applied area to determine guidance information, a “Hollow” path is displayed

(See Figure 53 on page 46).

When the reference guideline is established, the operator can begin driving Curve AB guidance.

The CenterLine software detects which guideline is closest to the centerline of the vehicle and pro-

vides guidance information with respect to that line. As the vehicle moves across the field (Figure

56) new guidelines, parallel to the reference guideline, are established based on the swath width

value entered in Guidance setup. When making a turn at the end of the field, the lightbar displays

the distance to the next swath (see Figure 58).

Figure 58: Distance to Next Curved Swath

CenterLine

30.0 FT

CenterLine

27.2 FT

CenterLine

14.7 FT

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 65 66

No comments

Teejet CenterLine 2.0 User Manual Page 56