Teejet FieldPilot Install Ford Versatile 8x6-9x6 User Manual download pdf (Page 18)

www.teejet.com

FieldPilot

12. RECOMMENDED ELECTRONICS INSTALLATION

The Steering Control Module (SCM) should be mounted securely to the oor of the cab as far forward in the

cab as possible. The control console can be mounted to the operator’s preference. The GPS antenna should

be mounted as far forward as possible on top of the hood on a metal surface of at least 4” square.

The Articulated Gyro Module (AGM) should be mounted towards the rear of the vehicle on a at surface that

is horizontal to the ground. Plug the CAN extension cable to the AGM Harness (45-07716) as well as the

CAN terminator. Route the other end of the CAN extension cable towards the cab and connect to the CAN on

the SCM harness.

Figure 1-14: Recommended Electronics Installation

SCM

Console

GPS

AGM

1 2 ... 13 14 15 16 17 18 19 20

No comments

Teejet FieldPilot Install Ford Versatile 8x6-9x6 User Manual Page 18