Teejet IC18 NH3 JOB COMPUTER User Manual download pdf (Page 29)

98-05230 R0 US

ISOBUS Job Computer : IC18 NH3

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

MACHINE

Machine congures machine settings. Options include Filling, Operation, Implement Parameters, Calibrations,

Alarm Congurations and OEM.

MAIN SETUP MODE MENU STRUCTURE

| | | | | |

Counters Job Parameters Machine User Interface Communication Help

Filling

Operation

Implement parameters – Section width

Implement speed sensor – Calibrations Nozzle preset setup

Flow sensor Alarm congurations Regulation parameters

OEM

The OEM setup menu is password protected and the settings in this menu are directly related to the tted OEM equipment.

Figure 3-13: Machine

1. From the Main Setup Screen , select MACHINE.

2. Select from:

►Filling – establishes the amount of material

remaining in the tank and the density of that

material.

►Operation – establishes Application Rate Step,

Speed Source, and Simulated Speed.

►Implement Parameters – establishes the Section

Width and Regulation Parameters.

►Calibrations – establishes either manual or

automatic settings of the sensors.

►Alarm Congurations – establishes alarms for

CAN Speed Source Timeout, Active Trip Count

Information mode and Tank Content Minimum

►OEM – The OEM setup menu is password protected and the settings in this menu are directly related to the

tted OEM equipment. Refer to the OEM Manual for information regarding OEM settings.

NOTE: Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save

the setting. Select the ESCAPE KEY to escape without saving settings and return to the previous

menu.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 62 63

No comments

Teejet IC18 NH3 JOB COMPUTER User Manual Page 29