Teejet FieldPilot Install AgChem 1803 User Manual download pdf (Page 10)

www.teejet.com

FieldPilot

INSTALLATION

If there are questions concerning the installation of the FieldPilot system on this vehicle, or due to

the changes in component specications the parts supplied in the kit are not exactly as presented

in this document, please contact your dealer or TeeJet Customer service representative for

clarication before installation. TeeJet Technologies is not responsible for misuse or incorrect installation of

the system.

NOTE: BE VERY CAREFUL TO ABSOLUTELY SECURE ALL CABLES AND HOSES SO THAT THEY

DON’T INTERFERE WITH THE MANY MOVING PARTS OF THE MACHINE!

1. PREPARE THE FIELDPILOT VALVE

Make sure the valve block is clean and dust free. Work on a clean bench. Remove the plastic plugs and

install the adapters (V) in the P and EF ports. Install adapters (S) on the ends of these.

Install two adapters (T) into the T, A and B ports. Install adapters (S) on the ends of these.

NOTE: All references to left and right are stated as if the user is seated in the driver’s seat.

Figure 1-2: Preparing Hydraulic Control Block

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

No comments

Teejet FieldPilot Install AgChem 1803 User Manual Page 10