Teejet CenterLine v1.07 User Manual download pdf (Page 39)

CenterLine

Software Version 1.07

CenterLine 33

CenterLine Real-Time Operation

Real-time Operation

Real-time guidance begins when <NEW?> or <RESUME?> is selected. At this point, the GPS receiver should

be properly connected to the CenterLine lightbar and running. See Figures 7-9 for diagrams showing how the

DGPS receiver should be connected. The default guidance mode is Straight-Line Guidance and the current

guidance mode is displayed in reverse video. The current guideline information is stored in memory, along

with the field’s trajectory data, is lost when <NEW?> is selected, and retained when <RESUME?> is selected.

Only information for a single guideline is stored. While in Headland mode, A and B points can be marked for

Straight-Line or Curved AB guidance.

Real-time Menu

During real-time operation, a real-time menu (See Figure 32 on page 32) is available that allows

you to switch between guidance patterns, mark A and B points for straight-line or Curved AB guid-

ance, start a new A-B line, and exit. The real-time menu is accessed by pressing Up or Down dur-

ing guidance operation. When either of these keys is pressed, the guidance messages displayed

in the text window are replaced by the real-time menu (See Figure 32 on page 32). Use Up and

Down to scroll through the menu and press Enter to select an item. The real-time menu times out

when 5 seconds have passed and no arrow keys have been pressed.

Apply On/Off

If no switchbox or boom sense cable is being used and the <GUIDANCE><STATUS> setting (See

“Status” on page 17) is set to off, Apply On/Off information must be provided to the CenterLine sys-

tem manually. To toggle the Apply On/Off status, scroll the real-time menu (See Figure 32 on

page 32) until <Apply on> or <Apply off> appears in the text window. Pressing Enter switches to

the status displayed.

NOTE: This does not turn the application on and off. It only notifies the CenterLine system

of the application status. <Apply on> and <Apply off> do not appear if <GUIDANCE><STA-

TUS> is set to ON.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

No comments

Teejet CenterLine v1.07 User Manual Page 39